Clik here to view.
sigrok at the Chaos Communication Congress (31C3)
As in previous years various sigrok developers will be at the Chaos Communication Congress (31C3) in Hamburg, Germany. The conference takes place December 27th to 30th, 2014.There will be a sigrok...
View ArticleClik here to view.
New protocol decoder: Aosong AM230x / DHT11
We're happy to announce that libsigrokdecode now supports the am230x protocol decoder.This PD decodes the custom protocol of the Aosong AM230x and DHT11 temperature and humidity sensors.A short...
View ArticleClik here to view.
New protocol decoder: PWM
We're happy to announce that libsigrokdecode now supports the pwm protocol decoder.The PD was contributed by Torsten Duwe and Sebastien Bourdelin, thanks a lot!This decoder will show the duty cycle of...
View ArticleClik here to view.
MASTECH MS8250B supported
libsigrok now supports yet another multimeter, the MASTECH MS8250B.This is a 4000 counts autorange DMM with USB connectivity (via an internal USB-to-serial IC built into the DMM).Apart from the usual...
View ArticleClik here to view.
New protocol decoders: ARM TPIU, ITM, ETMv3
We're happy to announce that libsigrokdecode now supports three new, closely related, protocol decoders: arm_tpiu, arm_itm, and arm_etmv3.Here's a quick overview of the protocols that are decoded: The...
View ArticleClik here to view.
BayLibre ACME now supported
libsigrok now supports the BayLibre ACME device.This a BeagleBone Black cape with an I²C-attached Texas Instruments INA226 current/power monitor and an I²C-attached TI TMP435 temperature sensor.The...
View ArticleClik here to view.
UNI-T UT372 now supported
libsigrok now supports a new device class, tachometers! The first supported device of this type is the UNI-T UT372.It's a USB-attached device (uses one of the WCH CH9325 ICs commonly found in UNI-T...
View ArticleClik here to view.
New protocol decoder: 24xx I²C EEPROM
It's been a while since the eeprom24xx protocol decoder was added to libsigrokdecode, but there hasn't been an "official" announce yet, so here goes. The eeprom24xx PD can decode the I²C-based protocol...
View ArticleClik here to view.
New protocol decoder: Avago ADNS-5020
We're happy to announce that libsigrokdecode now supports the adns5020 PD, a decoder for the Avago ADNS-5020 optical mouse sensor protocol.The decoder was contributed by Karl Palsson, thanks a lot!It...
View ArticleClik here to view.
Maynuo M9812 now supported
We're happy to announce that libsigrok now supports the Maynuo M9812 digital load.The driver was contributed by Aurelien Jacobs, thanks a lot!It was written in a pretty generic way so that it probably...
View ArticleClik here to view.
libsigrokdecode 0.3.1 released!
We're happy to announce that libsigrokdecode 0.3.1 has been released.You can download the libsigrokdecode-0.3.1.tar.gz source tarball from sigrok.org/download as usual.This is mostly a bugfix-release,...
View ArticleClik here to view.
New protocol decoder: Jitter
libsigrokdecode has had support for the jitter protocol decoder for a while now (it is already shipped with the recently-released libsigrokdecode 0.3.1), but this hasn't been officially announced yet,...
View ArticleClik here to view.
New protocol decoder: Stepper motor
Another protocol decoder that hasn't had an official announce yet is stepper_motor, a PD which decodes speed and position of a stepper motor.The PD takes a "step" and "direction" pin as input.You can...
View ArticleClik here to view.
KERN scale series supported
We're happy to announce that libsigrok now supports various weighing scales from KERN & SOHN GmbH.The new kern-scale driver currently supports (and was tested on) the KERN EW 6200-2NM scale and all...
View ArticleClik here to view.
New protocol decoder: Microchip MRF24J40
We're happy to announce that libsigrokdecode supports yet another new protocol decoder: mrf24j40.This PD decodes the SPI-based protocol of the Microchip MRF24J40, an IEEE 802.15.4 2.4 GHz RF tranceiver...
View ArticleClik here to view.
Hung-Chang DSO-2100 supported
We're happy to announce that libsigrok now supports another PC oscilloscope, the Hung-Chang DSO-2100 (also sold under different brand names such as Voltcraft or Protek).This is a 1999-era parallel-port...
View ArticleClik here to view.
GW Instek GDS-800 series supported
We're happy to announce that the GW Instek GDS-800 oscilloscope series is now supported in libsigrok.These are devices ranging from 60MHz bandwidth up to 250MHz, with a samplerate of 100MSa/s (or...
View ArticleClik here to view.
New protocol decoder: Modbus
Yes, it's that time of the week again — libsigrokdecode supports yet another protocol decoder since somewhat recently: modbus.In the current state the PD stacks on top of the UART decoder and decodes...
View ArticleClik here to view.
New protocol decoder: Qi
Another somewhat recently added protocol decoder for libsigrokdecode is the qi PD.This PD decodes demodulated data streams used by the Qi standard for communication from the receiver to the charging...
View ArticleClik here to view.
Yokogawa DLM2000 series oscilloscope support
We're happy to announce even more hardware support in libsigrok. It now supports the Yokogawa DLM2000 series oscilloscopes / mixed-signal scopes.Thanks a lot to Soeren Apel for writing the code and...
View Article