Clik here to view.
GW Instek GDS-800 series supported
We're happy to announce that the GW Instek GDS-800 oscilloscope series is now supported in libsigrok.These are devices ranging from 60MHz bandwidth up to 250MHz, with a samplerate of 100MSa/s (or...
View ArticleClik here to view.
New protocol decoder: Modbus
Yes, it's that time of the week again — libsigrokdecode supports yet another protocol decoder since somewhat recently: modbus.In the current state the PD stacks on top of the UART decoder and decodes...
View ArticleClik here to view.
New protocol decoder: Qi
Another somewhat recently added protocol decoder for libsigrokdecode is the qi PD.This PD decodes demodulated data streams used by the Qi standard for communication from the receiver to the charging...
View ArticleClik here to view.
Velleman DVM4100 support
libsigrok now supports the Velleman DVM4100 multimeter, a 6000 counts DMM with USB connectivity.This DMM uses the Dream Tech International DTM0660 chip, which has a similar protocol as the Fortune...
View ArticleClik here to view.
sigrok-firmware-fx2lafw 0.1.3 released!
We're happy to announce the sigrok-firmware-fx2lafw 0.1.3 release. This is an open-source firmware that allows you to use any of the popular Cypress FX2 based devices as logic analyzers.The source code...
View ArticleClik here to view.
sigrok at the Chaos Communication Congress (32C3)
As in previous years various sigrok developers will be at the Chaos Communication Congress (32C3) in Hamburg, Germany. The conference takes place December 27th to 30th, 2015.There will be a sigrok...
View ArticleClik here to view.
New protocol decoder: MDIO
libsigrokdecode supports yet another protocol decoder since a while ago (which hasn't seen an official announce yet, though): mdio.This is a PD for decoding the Management Data Input/Output (MDIO)...
View ArticleClik here to view.
New logo: Works with sigrok
We've created a new sigrok-related logo that manufacturers or resellers of devices can use to advertise sigrok-compatible products: the "Works with sigrok" logo.If you're developing or selling logic...
View ArticleClik here to view.
LeCroy LogicStudio support
libsigrok now supports yet another new device. This time: the LeCroy LogicStudio.This is a 16-channel logic analyzer with up to 1GHz sampling rate (depending on the number of channels used).The device...
View ArticleClik here to view.
New protocol decoder: USB request
libsigrokdecode has received support for another, quite interesting protocol decoder recently: usb_request.This PD stacks on top of the usb_packet decoder, which in turn stacks on top of...
View ArticleClik here to view.
Korad KAxxxxP series support
We're happy to announce that libsigrok now supports the Korad KAxxxxP series of programmable power supplies, including the popular Korad KA3005P.These are all 1-channel lab power supplies with various...
View ArticleClik here to view.
sigrok + UNIX = Awesome! - part III - Fun and Games with gpsd
So here I am hanging out at the local hacker space in Richmond. We, the group that meet up every Tuesday evening are small, yet perfectly formed. This evening Paul (MØTZO), a friendly radio ham, and...
View ArticleClik here to view.
sigrok at the Chaos Communication Congress (31C3)
As in previous years various sigrok developers will be at the Chaos Communication Congress (31C3) in Hamburg, Germany. The conference takes place December 27th to 30th, 2014.There will be a sigrok...
View ArticleClik here to view.
New protocol decoder: Aosong AM230x / DHT11
We're happy to announce that libsigrokdecode now supports the am230x protocol decoder.This PD decodes the custom protocol of the Aosong AM230x and DHT11 temperature and humidity sensors.A short...
View ArticleClik here to view.
New protocol decoder: PWM
We're happy to announce that libsigrokdecode now supports the pwm protocol decoder.The PD was contributed by Torsten Duwe and Sebastien Bourdelin, thanks a lot!This decoder will show the duty cycle of...
View ArticleClik here to view.
MASTECH MS8250B supported
libsigrok now supports yet another multimeter, the MASTECH MS8250B.This is a 4000 counts autorange DMM with USB connectivity (via an internal USB-to-serial IC built into the DMM).Apart from the usual...
View ArticleClik here to view.
New protocol decoders: ARM TPIU, ITM, ETMv3
We're happy to announce that libsigrokdecode now supports three new, closely related, protocol decoders: arm_tpiu, arm_itm, and arm_etmv3.Here's a quick overview of the protocols that are decoded: The...
View ArticleClik here to view.
BayLibre ACME now supported
libsigrok now supports the BayLibre ACME device.This a BeagleBone Black cape with an I²C-attached Texas Instruments INA226 current/power monitor and an I²C-attached TI TMP435 temperature sensor.The...
View ArticleClik here to view.
UNI-T UT372 now supported
libsigrok now supports a new device class, tachometers! The first supported device of this type is the UNI-T UT372.It's a USB-attached device (uses one of the WCH CH9325 ICs commonly found in UNI-T...
View ArticleClik here to view.
New protocol decoder: 24xx I²C EEPROM
It's been a while since the eeprom24xx protocol decoder was added to libsigrokdecode, but there hasn't been an "official" announce yet, so here goes. The eeprom24xx PD can decode the I²C-based protocol...
View Article