Clik here to view.
Velleman DVM4100 support
libsigrok now supports the Velleman DVM4100 multimeter, a 6000 counts DMM with USB connectivity.This DMM uses the Dream Tech International DTM0660 chip, which has a similar protocol as the Fortune...
View ArticleClik here to view.
sigrok-firmware-fx2lafw 0.1.3 released!
We're happy to announce the sigrok-firmware-fx2lafw 0.1.3 release. This is an open-source firmware that allows you to use any of the popular Cypress FX2 based devices as logic analyzers.The source code...
View ArticleClik here to view.
sigrok at the Chaos Communication Congress (32C3)
As in previous years various sigrok developers will be at the Chaos Communication Congress (32C3) in Hamburg, Germany. The conference takes place December 27th to 30th, 2015.There will be a sigrok...
View ArticleClik here to view.
New protocol decoder: MDIO
libsigrokdecode supports yet another protocol decoder since a while ago (which hasn't seen an official announce yet, though): mdio.This is a PD for decoding the Management Data Input/Output (MDIO)...
View ArticleClik here to view.
New logo: Works with sigrok
We've created a new sigrok-related logo that manufacturers or resellers of devices can use to advertise sigrok-compatible products: the "Works with sigrok" logo.If you're developing or selling logic...
View ArticleClik here to view.
LeCroy LogicStudio support
libsigrok now supports yet another new device. This time: the LeCroy LogicStudio.This is a 16-channel logic analyzer with up to 1GHz sampling rate (depending on the number of channels used).The device...
View ArticleClik here to view.
New protocol decoder: USB request
libsigrokdecode has received support for another, quite interesting protocol decoder recently: usb_request.This PD stacks on top of the usb_packet decoder, which in turn stacks on top of...
View ArticleClik here to view.
Korad KAxxxxP series support
We're happy to announce that libsigrok now supports the Korad KAxxxxP series of programmable power supplies, including the popular Korad KA3005P.These are all 1-channel lab power supplies with various...
View Articlelibserialport 0.1.1 released!
We're happy to announce that libserialport 0.1.1 has been released! libserialport is a portable, LGPLv3+ shared library written in C which allows users to talk to serial port devices on various OSes...
View ArticleClik here to view.
Major sigrok releases: libsigrok, libsigrokdecode, sigrok-cli, PulseView
We're happy to announce a set of major new releases of the following sigrok projects: libsigrok 0.4.0, libsigrokdecode 0.4.0, sigrok-cli 0.6.0, and PulseView 0.3.0.The tarballs are available for...
View ArticleClik here to view.
New protocol decoder: timing
libsigrokdecode now supports another protocol decoder: timing. This has been supported for a while already actually (and is part of libsigrokdecode 0.4.0), but hasn't seen an official announce yet, so...
View ArticleClik here to view.
New protocol decoder: em4100
libsigrokdecode now supports another protocol decoder, em4100.The EM4100 protocol for certain 100-150kHz RFID tags is layered on top of one of three possible modulation schemes: Manchester, Biphase, or...
View ArticleClik here to view.
PCE PCE-322A support
libsigrok now supports the PCE PCE-322A sound level meter.This is a USB-based sound level meter with various settings such frequency weighting (A or C), a frequency range of 31.5 Hz to 8 kHz, an...
View ArticleClik here to view.
New protocol decoder: wiegand
libsigrokdecode recently gained support for yet another protocol decoder: wiegand.This PD supports the Wiegand interface protocol, often used in electronic entry systems, card swipe systems, some RFID...
View ArticleClik here to view.
New protocol decoder: ssi32
libsigrokdecode now supports another new protocol decoder: ssi32.This PD decodes the SSI32 protocol, which is based on SPI (hence the decoder stacks on top of the SPI PD).As usual, we have a bunch of...
View ArticleClik here to view.
sigrok-firmware-fx2lafw 0.1.4 released!
We're happy to announce the sigrok-firmware-fx2lafw 0.1.4 release. This is an open-source firmware that allows you to use almost any of the popular Cypress FX2 based devices as logic analyzers.The...
View ArticleClik here to view.
New protocol decoder: ps2
libsigrokdecode now supports another new protocol decoder: ps2.This PD decodes the PS/2 (low-level) protocol for keyboards, mice, and some other PS/2-attached devices.As usual, we have a bunch of...
View ArticleClik here to view.
PeakTech 3330 support
libsigrok now supports yet another multimeter: this time it's the PeakTech 3330.This is a 4000 counts, CAT III (1000V) — at least in theory — multimeter with RS232 and USB connectivity and some neat...
View ArticleClik here to view.
New protocol decoder: gpib
Another protocol decoder was recently added to libsigrokdecode: GPIB.This PD decodes the General Purpose Interface Bus (GPIB, previously also HPIB) protocol, a.k.a. IEEE-488.This protocol is often used...
View ArticleClik here to view.
PeakTech 2170 support
Another new device was recently added to the list of libsigrok-supported hardware: PeakTech 2170.This is a 20000 counts handheld LCR meter with USB connectivity.It's using a standard Prolific PL2303 IC...
View Article