libsigrok now supports the Sysclk SLA5032 logic analyzer.
This is a 32-channel logic analyzer with up to 500MHz sampling rate. It can be switched into one of three different modes (the current mode is indicated by a green LED on the respective mode text):
- 32CH 500M: 500MHz sampling rate, 32 channels, max. 64Mbits storage per channel, support for hardware triggers (sysclk-sla5032 driver).
- Saleae 100M: The device enumerates as a Saleae Logic16, streaming possible like with the Logic16, only software triggers (saleae-logic16 driver).
- Saleae 500M: Similar to the above, but the max. sampling rate is actually 500MHz.
The device uses a Xilinx Spartan FPGA, DDR2 RAM, 2 SPI flashes, 2 I²C EEPROMs, a Cypress FX2, an Atmel Atmega8A microcontroller and a bunch of other components internally, full details in the wiki.
The libsigrok driver was contributed by Vitaliy Vorobyov, thanks a lot!