Clik here to view.
libsigrokdecode 0.5.1 released!
We're happy to announce the release of libsigrokdecode 0.5.1. Tarballs are available from the Downloads page, as usual.This is a "minor" release that doesn't change or remove any existing public API...
View ArticleClik here to view.
MASTECH MS8250D support
libsigrok now supports the MASTECH MS8250D multimeter.This is a USB-based, 6600 counts digital multimeter. It's connected to the PC via a Silicon Labs CP2102 USB to serial converter.It uses an 18-byte...
View ArticleClik here to view.
New protocol decoder: ac97
Another recent addition to libsigrokdecode is a the AC'97 protocol decoder.This one decodes the IntelAudio Codec '97 (AC'97) audio codec standard.As usual there's a few sample files in sigrok-dumps and...
View ArticleClik here to view.
Intronix Logicport LA1034 input file format support
libsigrok now supports a new input format, the native file format used by the Intronix Logicport LA1034 logic analyzer.These "LogicPort File" (*.lpf) files are created by the Intronix LogicPort...
View ArticleClik here to view.
Hantek 4032L support
libsigrok now supports the Hantek 4032L logic analyzer hardware.This is a USB-based, 32-channel logic analyzer with a samplerate of up to 400MHz (150MHz bandwidth according to vendor), with 2Gbit...
View ArticleClik here to view.
New protocol decoder: sda2506
lisigrokdecode has recently gained support for yet another protocol decoder: sda2506.This PD decodes the Siemens SDA 2506-5 serial nonvolatile 1-Kbit EEPROM protocol.This is a non-standard EEPROM...
View ArticleClik here to view.
libsigrokdecode 0.5.2 released!
We're happy to announce the release of libsigrokdecode 0.5.2. Tarballs are available from the Downloads page, as usual.This is a "minor" release that doesn't change or remove any existing public API...
View ArticleClik here to view.
libsigrok 0.5.1 released!
We're happy to announce the release of libsigrok 0.5.1. Tarballs are available from the Downloads page, as usual. This is a "minor" release that doesn't change or remove any existing public API...
View Articlesigrok-cli 0.7.1 released!
We're happy to announce the release of sigrok-cli 0.7.1. Tarballs and binaries are available from the Downloads page, as usual.In addition to the usual nightly binaries for Linux (AppImage) and Windows...
View ArticleClik here to view.
PulseView 0.4.1 released!
We're happy to announce the new PulseView 0.4.1 release! This is quite a major release with loads of new features and bugfixes.It requires the recently released libsigrok 0.5.1 and libsigrokdecode...
View Articlesigrok at 35C3
If you're at this year's CCC Congress (35C3) December 27-30 in Leipzig, Germany, please feel free to drop by at the sigrok assembly. We'll be there all 4 days of the congress (with the usual set of...
View ArticleIntroduction to sigrok lightning talk @ 35C3
As mentioned previously, there was a short "Introduction to sigrok" lightning talk by Soeren Apel at the 35C3 congress in Leipzig, Germany recently.The video of the talk is now up on various...
View ArticleClik here to view.
PulseView now has session setup save/restore support
PulseView recently gained initial support for a feature that has been requested quite a bit in the past: saving and restoring a specific session setup.There was support for restoring (most of) the...
View ArticleClik here to view.
New protocol decoder: ds2408
libsigrokdecode now supports yet another protocol decoder: ds2408.This one decodes the Maxim DS2408 1-Wire 8-channel addressable switch protocol.Some example traces are available in the sigrok-dumps...
View ArticleClik here to view.
100th supported sigrok protocol decoder: cc1101
Once again, libsigrokdecode has gained support for yet another protocol decoder. This time: cc1101. This PD decodes the SPI-based protocol of the Texas Instruments CC1101 sub-1GHz RF transceiver...
View ArticleClik here to view.
Sysclk SLA5032 support
libsigrok now supports the Sysclk SLA5032 logic analyzer.This is a 32-channel logic analyzer with up to 500MHz sampling rate. It can be switched into one of three different modes (the current mode is...
View Articlesigrok AppImage updates
As you probably know, we've been providing pre-built Linux binaries for PulseView and sigrok-cli in the form of AppImages for a while now. Those can be useful/convenient if you want to test sigrok...
View ArticleClik here to view.
sigrok-firmware-fx2lafw 0.1.7 released!
We're happy to announce the sigrok-firmware-fx2lafw 0.1.7 release. This is an open-source firmware that allows you to use almost any of the popular Cypress FX2 based devices as logic analyzers. It also...
View ArticleClik here to view.
New protocol decoder: seven_segment
libsigrokdecode now supports yet another protocol decoder: seven_segment. This one decodes the seven-segment display digits/character. Some example traces are available in the sigrok-dumps repo and...
View ArticleClik here to view.
New protocol decoder: hdcp
libsigrokdecode now supports yet another protocol decoder: hdcp. This one stacks on top of the i2c decoder and decodes the High-bandwidth Digital Content Protection (HDCP) protocol mapped to HDMI. Some...
View Article