libsigrokdecode 0.4.1 released!
We're happy to announce that libsigrokdecode 0.4.1 has been released.You can download the libsigrokdecode-0.4.1.tar.gz source tarball from sigrok.org/download as usual.This is mostly a bugfix-release,...
View ArticleClik here to view.
Hantek 6022BL support
libsigrok now supports the Hantek 6022BL device.This is a 2-channel USB oscilloscope (48MHz sampling rate, 20MHz analog bandwidth as per vendor); it can also be used as a 24MHz logic analyzer...
View ArticleClik here to view.
New protocol decoder: iec
libsigrokdecode has gained support for the iec decoder.This decodes the Commodore serial IEEE-488 (IEC) protocol.As usual, there's sample files and test-cases for the PD in our git repos.The decoder...
View ArticleClik here to view.
New protocol decoder: adf435x
libsigrokdecode now features yet another protocol decoder. This time: adf435x.This decoders supports the SPI-based protocol of the Analog Devices ADF4350 and ADF4351 RF synthesizers.The decoder was...
View ArticleClik here to view.
LeCroy X-Stream oscilloscope support
libsigrok now supports the LeCroy X-Stream series of oscilloscopes (and possibly others).This includes models from the WaveAce, WaveJet, WaveSurfer, and WaveRunner series in theory; some models may...
View ArticleClik here to view.
New protocol decoder: dali
libsigrokdecode now features another protocol decoder: dali.This decodes the Digital Addressable Lighting Interface (DALI) protocol.As usual, there are some example files in sigrok-dumps and some...
View ArticleClik here to view.
Rohde&Schwarz HMC 8043 support
libsigrok now supports the Rohde&Schwarz (previously Hameg) HMC 8043 programmable power-supply.This is a 3-channel power-supply with USBTMC and LXI connectivity.The protocol is SCPI-based, so the...
View ArticleClik here to view.
New protocol decoder: dsi
libsigrokdecode now supports yet another protocol decoder: dsi.This decodes the Digital Serial Interface (DSI) lighting control protocol.As usual, there are some example files in sigrok-dumps and some...
View ArticleClik here to view.
New protocol decoder: microwire
Yup, it's time for a new protocol decoder again. libsigrokdecode supports the microwire decoder since a few days.Microwire is a "serial interface" (like so many others) that was specified by National...
View ArticleClik here to view.
New protocol decoder: ade77xx
libsigrokdecode now supports the ade77xx protocol decoder.The Analog Devices ADE77xx chips are SPI-based "Poly Phase Multifunction Energy Metering IC with Per Phase Information".The PD currently...
View ArticleClik here to view.
Major sigrok releases: libsigrok, libsigrokdecode, fx2lafw, sigrok-cli,...
We're happy to announce a set of major new releases of the following sigrok projects: libsigrok 0.5.0, libsigrokdecode 0.5.0, sigrok-firmware-fx2lafw 0.1.5, sigrok-cli 0.7.0, and PulseView 0.4.0.The...
View ArticleClik here to view.
New protocol decoder: eeprom93xx
libsigrokdecode supports another protocol decoder since a little while ago, eeprom93xx.This is a PD that stacks on top of the previously announced microwire decoder, and provides higher-level 93xx...
View ArticleClik here to view.
PeakTech 4390A support
It's been a while since support for a new DMM was added in libsigrok. As of yesterday we now also support the PeakTech 4390A multimeter.This is a rebranded Metex M-3860M (even says so on the device...
View ArticleClik here to view.
New protocol decoder: ds243x
Another protocol decoder recently added to libsigrokdecode is ds243x, which decodes the Maxim/Dallas DS243x 1-Wire EEPROM protocol.It currently supports the DS2432 (1-Wire 1Kbit protected EEPROM with...
View ArticleClik here to view.
New protocol decoder: maple_bus
If you're into game consoles you might want to check out the latest protocol decoder in libsigrokdecode: maple_bus.This decodes the Maple bus, the protocol that peripherals of the Sega Dreamcast...
View ArticleClik here to view.
fx2grok-tiny: an 11x11mm FX2 based Open Hardware logic analyzer for use with...
This blog post won't be about the sigrok software for a change. Instead, it is meant to introduce a little hobby project for a tiny DIY FX2 based Open Hardware logic analyzer (that you can use with...
View ArticleClik here to view.
sigrok at 34C3
If you're at this year's CCC Congress (34C3) December 27-30 in Leipzig, Germany, please feel free to drop by at the sigrok assembly. We'll be there all 4 days of the congress (with the usual set of...
View ArticleClik here to view.
New protocol decoder: morse
libsigrokdecode yet again gained support for another protocol decoder: morse.This decodes the well-known Morse code signals (recorded via oscilloscope or logic analyzer).Have a look at the source code...
View ArticleClik here to view.
sigrok-firmware-fx2lafw 0.1.6 released!
We're happy to announce the sigrok-firmware-fx2lafw 0.1.6 release. This is an open-source firmware that allows you to use almost any of the popular Cypress FX2 based devices as logic analyzers. It also...
View ArticleClik here to view.
New protocol decoder: graycode
A new libsigrokdecode decoder that has been added a while back is graycode.This PD allows decoding of gray code and rotary encoder protocols. Check out the source code for more details.As usual there's...
View Article